Driver fatigue monitor with signal output 45km/h start-up speed
Description
To improve road safety, OEMs and Tier 1s must have a deep understanding of the state of the driver: their emotions, levels of drowsiness and distraction, and their reactions to the vehicle systems and driving experience. Using cameras and microphones, Affectiva Automotive AI unobtrusively measures, in real time, complex and nuanced emotional and cognitive states from face and voice. This next generation in-cabin software is fueled by custom deep learning architectures, computer vision, speech processing and massive amounts of real-world data. It enables OEMs and Tier 1s to measure driver impai
Attention:
Non-authorized person, please do not open or repair the device.
Please do not operate the system when driving to avoid dangerous
Please handle carefully, do not drop or impact with hard objectives
Do not use chemicals or cleaning agents to clean the machine, it will damage the machine surfaces or rust the paint.
keep it away from water or moist place, device will be rusted or shortcut in those area.
Do not rip, bend or squeezed the wiring by heavy object, or it will be hot to fire.
Power input and output
| Input |
9-36V |
| power consumption |
100mA in 12V car, and 60mA in 24V car |
| I/O output |
high resistance status under normal status, low voltage output when triggered |
| Working Temprature: |
0-80℃ |
| Working Humility: |
10%-90% |
| Weigh: |
108g |
| Demension: |
4.5*10.2cm |
I/O and RS232 output optional:
I/O output is only a high/low voltage output, you can get only the alarm signal,the connection is easy. The default setting is high resistance status under normal status, low voltage output when triggered.
RS232 output has alarm signal and picture output, thus you can get the driver's face picture in the center, it need to integrate to the GPS system via protocol.
1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm
Product Tags:
|
|
Warning Anti Sleep System With Signal Output 45km Every Hour Start Up Speed Images
|
